CTC Union SHDSL Manual de usuario descargar pdf (Pagina 104)

104

Setup Serial Parameter, RTS

The behavior of the RTS (Request To Send) signal may be set in one of two ways. When set 'on', the RTS signal is always

forced on (active low), when set 'from DTE' the RTS signal will follow the DTE's condition. The default setting for RTS is on.

Setup Serial Parameter, CTS

The behavior of the CTS (Clear To Send) signal may be set in one of three ways. When set 'on', the CTS signal is always

forced on (active low), when set 'off' the signal is always forced off, or CTS will follow RTS (Request To Send) condition of 'on'

for RTS on 'off' for RTS off. The default setting for CTS is to follow RTS.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 161 162

Sin comentarios

CTC Union SHDSL Manual de usuario Pagina 104